TI5800 Sensor Power Supply and Output Measurement Device

• Customization: Available
• After-sales Service: 24 Hours
• Warranty: 12 months Excellent After-sales Service
• Model NO.: TI5800
• Application: Electromagnetic Instrument, Electrical Calibration
• Power: Electricity
• LCD Display: With LCD Display
• Customized: Non-Customized
• Voltage measurement range: ±(10 mV ~ 12 V)
• Current Measurement Range: ±(1 mA ~ 1.1 A)
• Measurement Frequency: DC,AC 45 Hz~1 kHz
• Measurement Uncertainty: 50 ppm
• Power Supply: ±(5.0 V~50 V)
• measurement channels: 1~4 Optional
• Transport Package: Package for Exporting
• Trademark: TUNKIA
• Origin: China

Product Description

TI5800 Sensor Power Supply and Output Tester

1. Summary

TI5800 integrates a precision voltmeter, precision ammeter, and programmable adjustable voltage source. It supplies power to a voltage or current sensor when testing it, and accurately measures the sensor's secondary output current Is or voltage Us. This instrument can be combined with a standard current source or voltage source to form a sensor testing device to test voltage or current sensors.

2. Feature

1. Voltage Us Measuring Range:10 mV ~ 12 V.
2. Current Is Measuring Range:1 mA ~ 1.1 A.
3. Measurement Frequency: DC,AC 45 Hz~1 kHz(Optional).
4. DC Measurement Uncertainty: 50 ppm.
5. Built-in DC ±(5.0 V~50 V) adjustable power supply.
6. Supports power consumption measurement of the tested sensor.
7. Optional connection adapter to match the sensor interface of DB9.
8. Optional 1~4 measurement channels.

3. Application

☆ Sensor power supply and measurement of secondary signals

Sensor Secondary Signal Measurement Module

1. Built-in standard ammeter and standard voltmeter can accurately measure the secondary output Is or Us of the sensor.
2. It can be used with standard current sources or voltage source groups to test the proportional error of voltage or current sensors.

Sensor Power Supply Module

1. Built-in DC ±(5 V ~ 50 V) adjustable power supply can test the power supply impact of the sensor under test.
2. A standard ammeter is connected in series in the power supply module loop. It can measure the no-load or full-load power consumption of the sensor being tested.

 

4. Specification

4.1 DC Voltage/Current Measurement

Current Range	10 mA,100 mA,1 A,manual/automatic range switching.
	± (1 mA ~ 1.1 A)
Voltage Range	100 mV,1 V,10 V,manual/automatic range switching.
	± (10 mV ~ 12 V)
Measurement Uncertainty(k=2)	0.003%*RD + 0.002%*RG ^[^1]
Temperature Coefficient@ (0°C~40°C)	2 ppm*RD/°C
Display	7-digit decimal
Note	[1]: RD is the reading value, RG is the range value, the same below.

 

4.2 AC Voltage/Current Measurement (Optional)

Current Range	10 mA,100 mA,1 A,manual/automatic range switching.
	1 mA ~ 1.1 A
Voltage Range	100 mV,1 V,10 V,manual/automatic range switching.
	10 mV ~ 12 V
Measurement Frequency	45 Hz ~ 1 kHz
Measurement Uncertainty(k=2)	0.006%*RD + 0.004%*RG
Temperature Coefficient@ (0°C~40°C)	5 ppm*RD/°C
Display	7-digit decimal

 

5. General Specification

Power Supply	AC ( 220 ± 22 ) V,(50±2) Hz
Maximum Power Consumption	100 VA
Warm-up Time	2 times the last predicted warm-up time, up to 30 minutes.
Working Environment	Temperature: 0°C ~ 40°C Humidity: 20%R·H ~ 80%R·H,no condensation. Others: No electromagnetic field interference.
Storage Environment	Temperature: -20°C ~ 70°C Humidity: <95%R·H,no condensation.
Altitude	< 3000 m
Communication Interface	RS232×1

 

6. Ordering Information

Company Profile