TS2500 Magnetic Properties Measuring System for Electrical Steel Cores

• After-sales Service: 24 Hours
• Warranty: 356 Days
• Testing Frequency: 50Hz /60Hz /400Hz/1kHz
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: TS2500
• Testing Mode: setting H to measure B / setting B to measure Ps
• Transport Package: Package for Exporting
• Trademark: Aviation Packaging
• Origin: China
• HS Code: 9030899090
• Production Capacity: 1000 Set/Year
• Package Size: 100.00cm * 80.00cm * 80.00cm
• Package Gross Weight: 60.000kg

Product Description

TS2500 Magnetic Properties Measuring
System for Electrical Steel Cores


*Above picture is only for reference, subject to actual delivery

1. Summary

TS2500 consists of excitation and measurement host, automatic measurement software. It's specially used to testing magnetic properties of motor laminated stator or electrical steel core.It can automatically measure the iron loss and other magnetic parameters of the motor stator core or other types of electrical steel core within a certain frequency range.

 

2. Features

1. Electrical parameters calibration function.
2. Testing frequency: 50Hz or 60Hz (400Hz,1kHz is optional).
3. Testing mode: setting H to measure B or setting B to measure Ps.
4. Testing in full frequency range with good accuracy and repeatability.
5. Automatically testing with professional software.
6. Automatically calculating magnetic parameters and curves.
7. Complete curves drawing and data management functions.
8. Modular design, easy to upgrade or maintenance.
9. Multi-strand wire is customizable to simplify winding process.

 

3. Applications

☆ Core Magnetic Properties Measurement

1. Testing silicon core or stator core by direct winding.
2. Setting multiple test points according to frequency and magnetic flux density B.
3. Measurement Ps by locking B value.
4. Magnetic parameters: magnetic field strength Hm, magnetic flux density Bm, specific total loss Ps, specific apparent power Ss, waveform coefficient FF, total loss P, etc.
5. Draw magnetic characteristic curves: hysteresis loop, Ps-H_m,Ps-B_m curves, etc.

 

4. Specifications

4.1 Electrical Specifications

Output	Max. Power	10 kVA (Optional)
	Frequency	50 Hz / 60 Hz…400 Hz…1 kHz (Optional)
	Protect	Over current, Overload, Over temperature, Short circuit protection
Measurement	Uncertainty of U and I (k=2)	0.1%*RG ^[1]
	Uncertainty of Power (k=2)	0.3%*FS ^[2]

1. Note: [1]RG is the range value, [2]FS = Voltage range value × Current range value.
2. Note: The above indicators are typical cases, and the actual parameters should be planned in detail according to the samples tested by users.

 

4.2 Magnetic Specifications

Typical Frequency Point	Magnetic Parameters	Typical Test Point^[5]	Uncertainty (k=2)	Repeatability
50Hz / 60Hz	Ps	P0.5 ^[2]... P1.5	2.0%	0.5%
400 Hz	Ps	P0.5 ^[2]... P1.5	2.5%	1.0%
1 kHz	Ps	P0.5 ^[2]... P1.0	3.0%	1.5%

1. Note[3] : Test conditions : ( 23 ± 5 )ºC, demagnetize core before testing.
2. Note[4] : Don't move the measured core and coils, repeated measurements for serval times, and calculate measurement repeatability.
3. Note[5] : The test points are only reference. Actual performance of the measured core due to the material properties, weight, testing frequency, current, power load capacity.
4. Note[6] : P_1.0 refers to the specific total loss value when B=1.0T, and so on.

 

5. General Specifications

Power Supply	AC ( 380 ± 38 ) V,( 50 ± 2 ) Hz
Temperature Performance	Operating Temperature:( 23 ± 5 )ºC; Storage Temperature:-20°C~70°C
Humidity Performance	Operating Storage:40%~80% R·H,non-condensing Storage Humidity:< 80% R·H,non-condensing

 

6. Ordering Information

Company Profile