TD6600 Relay Protection Tester Verification Device and Calibrator

• Customization: Available
• After-sales Service: Life Time
• Warranty: 12 Months Excellent After-sales Service
• Model NO.: TD6600
• Application: Electromagnetic Instrument, Electrical Calibration
• Power: Electricity
• LCD Display: With LCD Display
• Customized: Non-Customized
• Accuracy: Class 0.02
• 6-channel of ACV/DCV Measurement: 200 mV~1100 V
• 6-channel of ACI/DCI Measurement: 1 mA ~ 60 A
• 12-channel of Small Signal Measurement: 1 mV~7.7 V
• Frequency: 10 Hz~1 kHz
• Transport Package: Wooden Package
• Specification: 480 mm(W) × 400 mm(D) × 270 mm(H)
• Trademark: TUNKIA
• Origin: China
• Production Capacity: 100
• Package Size: 60.00cm * 50.00cm * 35.00cm
• Package Gross Weight: 25.000kg

Product Description

 TD6600 Relay Protection Tester Verification Device

Summary

TD6600 is an intelligent instrument dedicated to testing the technical performance of relay protection testers. The instrument can accurately measure multiple channels of AC/DC voltages, currents, and small signal voltages. Its accuracy is Class 0.02. The user can complete the full-function test of the relay protection tester of Class 0.05 and below with this instrument. Compared with traditional methods, this instrument has the characteristics of simple connection and convenient operation.

Features

1. 6-channel of AC/DC Voltage Measurement:200 mV~1100 V
2. 6-channel of AC/DC Current Measurement:1 mA~60 A
3. 12-channel of Small Signal Measurement:1 mV~7.7 V
4. Frequency:10 Hz~1 kHz
5. Phase:0.000°~359.999°
6. Voltage/Current Accuracy:Class 0.02
7. Harmonic/Ripple Measurement Function
8. 4 Pairs of Binary Input, 4 Pairs of Binary Output
9. Time Measurement Function

Application

 

 

 
 

Appearance

 

☆ Instrument Front/Side Panel
Number	Function
1	The feet can be folded to raise the instrument slightly to a certain angle to obtain the best viewing angle for operation and reading.
2	The instrument handle is convenient for carrying the instrument.
3	LCD touch color screen, intuitive display of multiple power levels, full touch operation, greatly improving the usability of the instrument.
4	6-channel current input terminal.
5	6-channel current input terminal.

 

☆ Instrument Rear Panel
Number	Function
1	8-channel switch output terminals, including 4-channel optocoupler outputs and 4-channel empty contact outputs.
2	4-channel switch input terminals.
3	12-channel small signal measurement terminals.
4	USB interface, RS232 interface, LAN interface, used to connect to the computer for communication.
5	220V power input socket with ship type switch and fuse.

 

Characteristics

 

☆ Wide Measuring Range
	A wide range of measurements can meet the calibration of relay protection testers commonly used in power systems Fully automatic range switching, built-in protection module in the circuit, and alarm prompt when necessary.

☆ Ripple Measurement Function
	A wide range of measurements can meet the calibration of relay protection testers commonly used in power systems Fully automatic range switching, built-in protection module in the circuit, and alarm prompt when necessary.

Harmonic Measurement Function and Graphical Display

 

☆ Harmonic Measurement Function and Graphical Display
Number	Function
1	The instrument can measure 2nd to 63rd harmonics, and observe the waveforms of the electric quantities of each phase after the harmonics are loaded.
2	The histogram visually displays the frequency spectrum of each harmonic (fundamental wave is 100%).
3	It displays the content and phase value of the 2^nd to 63^rd harmonic.
4	It can visually display the phasor diagram, the output voltage and current amplitude and phase direction of each channel.
5	Display the waveform of the measured power in real time, and intuitively analyze the waveform distortion of the measured power.

 

☆  Binary Input/Output and Time Measurement
Number	Function
1	Built-in time measurement module, response time uncertainty up to 2 μs, can complete response time and synchronization test.
2	Binary Input:4 pairs, open contact or TTL level (0~5) V.
3	Binary Output:4 pairs of optocoupler output, 4 pairs of open contact output.
4	Binary Output:4 pairs of open contact outputs.

 

 

 

 

 

☆ TD6610 With Load Capacity Test (option)
	TD6610 is a program-controlled and adjustable electronic load, which is specially used to test the load capacity of voltage source and current source. Voltage source electronic loads up to 100 VA, current source electronic loads up to 240 W. The load power factor is adjustable and meet the requirements of the load capacity test with an adjustable range of 0.4L ~ 1.0 ~ 0.4C.

 

☆ Communication Interface and Special Software
	The rear panel of the instrument is equipped with rich communication interfaces such as RS232, USB, LAN, etc., which is convenient for building a fully automatic test system. Equipped with special test software, and automatically generate test reports to improve test efficiency.

Company Profile