TS1810 Bending Automatic Testing System for Electrical Steel Sheets
*Above picture is only for reference, subject to actual delivery
1. Summary
TS1810 is a special instrument for bending automatic testing of electrical steel sheet.It can fully automatically test the performance of electrical steel sheet under plastic deformation in repeated bending. Reference standard: IEC TR 63114,YB/T 4731-2019.
2. Features
- Fully automatic feeding - testing - data uploading - unloading.
- The bending times can be set in the range of 0~9999.
- The counter displays the bending times in real time, and stops automatically after reaching the set times.
- It can automatically judge whether the bent sample is cracked or broken (optional).
- 24 hours of uninterrupted operation.
- The conventional method is manual feeding, and AGV and other feeding methods can be customized.
- Guarantee personal safety, functional safety and information safety.
- An optional code reader can be used to automatically scan the code. (optional)
3. Specifications
| Bending Radius |
5 mm |
| Bending Angle |
± 90° |
| Bending Speed |
60 times / min |
| Counting Range |
0~9999 |
| Tension of Specimens |
≥ 70 N |
| Specimens Size |
30 mm × ( 280~320 ) mm (width × length) |
4. General Specifications
| Power Supply |
AC ( 220 ± 22 ) V,( 50 ± 2 ) Hz |
| Temperature Performance |
Working Temperature:0°C~40°C;
Storage Temperature:-20°C~70°C |
| Humidity Performance |
Working Humidity:40%~80% R·H,No condensation
Store Humidity:< 95% R·H,No condensation |
| Air Supply |
- The compressed air pressure is not less than 0.6 MPa,and the air consumption is not less than 100 L/min
- The air source can be purchased with an air compressor or solved by yourself
|
5. Ordering Information
){kind=link}